Diamond SupraExpress 56e Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 102

background image

9

Five Year Limited Warranty

Our Warranty to you:

Diamond Multimedia warrants that for a period of five years from the date of original retail
purchase, your products will be free from defects in materials and workmanship. If you discover a
defect covered by this warranty, we will repair, replace, or refund the purchase price of the product at
our option using new or remanufactured components.

Diamond’s liability is limited solely

to the repair, replacement, or refund of the defective product.

This warranty gives

you specific legal rights and you may also have other rights which vary from state to state.

How to obtain service under this warranty:

To obtain service under this warranty you must deliver the product and the original sales receipt to
the dealer you purchased this product from or to Diamond. If you decide to return the product, you
must first call Diamond Technical Support and obtain an RMA as explained in the previous section.
You are responsible for paying shipping costs to Diamond.

Product failures not covered by this warranty:

This warranty covers defects in manufacture that arise from correct use in a home or office
environment. It does not cover damage caused by abuse, misuse, improper modification or repair,
moisture, corrosive environments, shipping, or high voltage surges from external sources such as
power line, telephone line, or connected equipment. This warranty also does not apply to any
product with an altered or defaced serial number.

Limits of liability:

We are only responsible for the repair of this product. We will not be liable to you or anyone else for
any damages that result from the failure of this product or from the breach of any express or
implied warranties. These include damage to other equipment, lost data, lost profits, or any
consequential, incidental, or punitive damages.

IN NO EVENT WILL DIAMOND BE LIABLE

FOR ANY AMOUNT GREATER THAN THE CURRENTLY SUGGESTED RETAIL PRICE
OF THIS PRODUCT.

Some states do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitation or exclusion may not apply to you.

Our legal disclaimer:

THIS WRITTEN WARRANTY REPRESENTS THE ENTIRE WARRANTY AGREEMENT
BETWEEN DIAMOND AND YOU. THIS WARRANTY MAY NOT BE ALTERED IN ANY
WAY OTHER THAN IN WRITING BY AN OFFICER OF DIAMOND MULTIMEDIA. ANY
IMPLIED WARRANTIES THAT MAY EXIST INCLUDING MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TOA
PERIOD OF FIVE YEARS FROM ORIGINAL RETAIL PURCHASE. NO WARRANTIES,
EITHER EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD.

Some states do not

allow limitations on how long an implied warranty lasts, so the above limitation may not apply to
you.

«
...
7
8
9
10
11
...
»

Содержание SupraExpress 56e







































































































Отзывы:

Нет отзывов

Похожие инструкции для SupraExpress 56e

Бренд: D-Link Страницы: 66

Бренд: D-Link Страницы: 26

Бренд: D-Link Страницы: 16

Бренд: Campbell Страницы: 3

Sierra Wireless AirLink RV50

Бренд: Campbell Страницы: 2

Бренд: Hama Страницы: 56

FlashPen My Disa USB Data Safe

Бренд: Hama Страницы: 14

Бренд: Hama Страницы: 9

Бренд: 9XTend-NEMA Страницы: 66

Бренд: Microsoft Страницы: 37

Бренд: Draytek Страницы: 288

Бренд: Commander Страницы: 5

Бренд: Globalstar Страницы: 36

Бренд: BlueTree Страницы: 67

Бренд: ADC Страницы: 68

Бренд: Zoom Страницы: 61

Бренд: NETGEAR Страницы: 33

Бренд: Planet Networking & Communication Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды