Diamond PLANCHA/3ELCR-N, Инструкция по эксплуатации

Страница: 7 / 17

6
PROFESSIONAL ELECTRICAL FRY-TOP
1 - The user should carefully read this manual, which must be kept for as long as the fry-top is in use.
This device should only be used for the specific end for which it was built. It should never be exposed to
other combustible materials, abrasive detergents, or any other objects that might damage the plate.
Only adults should operate this device, and thus children should avoid touching the grill.
For hygienic and safety reasons, this device must always be kept clean.
This machine should not be used by people whose physical, sensory or mental capacities are diminished
(including children), or by people with little experience or know-how, except if they can be assisted by
another person responsible for their safety and vigilance and are able to give them instructions pertaining to
the use of the machine.
It is also convenient to supervise children so as to assure they maintain a safe distance from the machine.
2 - Choose the location where the machine is going to be installed, bearing in mind the following instructions:
a) The grill should not be installed close to inflammable or heat deforming products. If this is not
possible, the grill working-place has to be isolated with a good thermic non-inflammable material.
b) Choose a dry location to place the grill.
c) If the feeding cables of the direct connection to the mains accidentally touch the machine during
everyday use, they must be protected with an insulation material for protection against the high
temperatures reached by the machine.
3
- The grill plate has a plastic protection that must remove before using the machine. It is advisable to clean the
plate with normal kitchen detergent and then grease it with a mixture of olive oil and vinegar.
4 - Make sure that the power supply is compatible with the grills’ power before connecting it. The power board
should have a 30 mA protection and a circuit breaker with the contacts 3 mm apart.
In the rear part of the machines there’s a terminal marked which allows the equipotential connection
between several machines.
ALWAYS CONNECT THE GRILL DIRECTLY TO AN EARTHED MAINS SOCKET AND NEVER
USE ANY KIND OF TYPE T ADAPTERS.
5 - DISPLAY AND KEYBOARD
Fig. 1
INSTRUCTIONS MANUAL (GB)