Quantum SBC User Manual Rev A
www.diamondsystems.com
Page 66
15.6
Analog Data
Figure 6: Analog Data section
This section reads data from an analog channel at regular intervals and displays the data in Voltage in the
“Voltage” column and in hex value in the “Data” column. The interval for successive readings can be set using the
“Enter delay” textbox. To set the delay, enter the delay in seconds and then click on the “Insert Delay” button.
An a
verage can be done over a number of samples. Enter the number of samples in the “Select number of
samples” textbox and then click “Average” button. The average will be displayed in the “Average” column
corresponding to the channels. If the system does not have enough samples to calculate the average, then it will
show the following message in the “Messages” text area: “Minimum number of samples is not collected”.