Diamond H2O Element ELE-1600, Руководство пользователя

Страница: 3 / 12

Element Series Manual
Page | 3
Feed Water Requirements
1. Plumbing feeding the element must be at least ¾” in diameter.
2. Filtered water must be used on the membrane . The element has a 5 micron filter to remove
particles and will drastically extend the life of the membrane. Changing these filters every
month is recommended to extend the life of the membrane. Follow instructions on page 10 to
change filters.
30-0021-XX Replacement 5 Micron Filter
30-0122-XX Alternate Replacement 5 Micron Filter
3. Soft Water is recommended. Excessive water hardness or iron concentrations may form scale
over the membrane and cause clogging. This will drastically reduce the useful life of the
membrane. Installing a water softener before each system to reduce hardness and iron is
recommended.
4. Anti-Scalent recommended. Slightly soluble contaminants like calcium sulfate, silica, or colloidal
clay will cause clogging. A continuous injection of an anti-scalent should be used if these
contaminants are present.
Recommended Specifications:
Total Dissolved Solids < 2000 ppm Hardness < 17 ppm
Iron < 0.1 ppm Manganese < 0.1 ppm
Silica < 10 ppm Hydrogen Sulfide < 0.0 ppm
Organics < 2 ppm TOC Turbidity < 0.1 NTU
Feed SDI < 3.0 pH 3 – 10
Free Chlorine 0.1 ppm Temperature 40-95°F
Inlet Pressure 20 – 80 psi
Membrane Operating Parameters:
Membrane Thin Film Composite
Typical Operating Pressure 150-200 psig Max Pressure: 400 psig
pH Range Continuous 3 – 10 pH Range, Cleaning 1 – 12
Max Pressure Drop 10 psig per membrane Max Calcium Hardness < 0.0 LSI
Nominal Rejection 98% Max Temperature 113°F