UNPACKING
1. Remove all packing material. Recycling is recommended.
2. Carefully remove the hand dryer from the shipping carton, using care not to drop the appliance.
3.Inspect carefully for any damage that may have occurred during transit. Check for any loose, missing or
damaged parts. If the hand dryer is damaged, promptly inform the shipper or dealer where you purchased it.
Standard items with the hand dryer are shown in Fig.1 together with tools need by the installer.
1
INSTALLATION
EN
4
EN
CAUTION
•
Make sure power supply breaker is switched off.
•
Check that the electrical supply corresponds to that shown on the rating plate. If the unit is connected to
any electrical supply other than stated on the rating plate of the unit, permanent damage or unsafe
operation of the unit may result.
The unit must be mounted on a flat vertical wall capable of supporting the full weight of the unit.
•
•
All electrical installation and repair work should be carried out by a qualified electrician or local service
Engineer in accordance with current local codes or regulations.
1.1 Place the main cover on a cloth to avoid marking its surface.
1.2 Remove the (2) security screws from the main body, using the service tool provided (fig 2).
Store safely.
1.3 Lift the front cover off the main body (fig 3).
1. Remove the Fornt cover
2
3
Service Tool
& Spare Screw
Installation
template
Wall mounting
anchors with screws
Flat cable clamp
& Screw
-in case without
built in power cable
Unit
Содержание DIAMOND PLUS GWHD22
Страница 1: ...DIAMONDPLUS...