Diamond Air DA425HA, Руководство пользователя

Страница: 38 / 38

DA425HA: 99900682: 6-10
WARRANTY COVERAGE - Products manufactured by Iowa
Mold Tooling Co., Inc. (IMT) are warranted to be free from
defects in material and workmanship, under proper use,
application and maintenance in accordance with IMT’s written
recommendations, instructions and specifications as follows:
1. Ninety (90) days; labor on IMT workmanship from the date
of shipment to the end user.
2. One (1) year; original IMT parts from the date of shipment
to the end user.
IMT’s obligation under this warranty is limited to, and the sole
remedy for any such defect shall be the repair or replacement (at
IMT’s option) of unaltered parts returned to IMT, freight
prepaid, and proven to have such defect, provided such defect
occurs within the above stated warranty period and is reported
within fourteen (14) days of its occurence.
IMPLIED WARRANTY EXCLUDED - This is the only
authorized IMT warranty and is in lieu of all other express or
implied warranties or representations, including any implied
warranties of merchantability or fitness for any particular
purpose or of any other obligations on the part of IMT.
ITEMS EXCLUDED - The manufacturer gives no warranty on
any components purchased by the manufacturer, and such
components as are covered only by the warranties of their
respective manufacturers.
WARRANTY CLAIMS - Warranty claims must be submitted
and shall be processed in accordance with IMT’s established
warranty claim procedure.
WARRANTY SERVICE - Warranty service will be performed
by any IMT distributor authorized to sell new IMT products of
the type involved or by any IMT Service Center authorized to
service the type of product involved or by IMT in the event of
direct sales made by IMT. At the time of requesting warranty
service, the purchaser must present evidence of the date of
delivery of the product. The purchaser shall pay any premium
for overtime labor requested by the purchaser, any charge for
making service calls and for transporting the equipment to the
place where warranty work is performed.
LIMITED WARRANTY
WARRANTY VOIDED - All obligations of IMT under this
warranty shall be terminated:(1) if service other than normal
maintenance or normal replacement of service items is
performed by someone other than an authorized IMT dealer, (2)
if product is modified or altered in ways not approved by IMT.
PURCHASER’S RESPONSIBILITY - This warranty covers
only defective material and workmanship. It does not cover
depreciation or damage caused by normal wear, accident,
improper protection in storage, or improper use. The purchaser
has the obligation of performing the care and maintenance duties
discussed in IMT’s written recommendations, instructions and
specifications. Any damage which results because of
purchaser’s failure to perform such duties shall not be covered
by this warranty. The cost of normal maintenance and normal
replacement of service items such as filters, belts, etc. shall be
paid by the purchaser.
CONSEQUENTIAL DAMAGES - The only remedies the
purchaser has in connection with the breach or performance of
any warranty on IMT products are those set forth above. In no
event will the dealer, IMT or any company affiliated with IMT,
be liable for business interruptions, loss of sales and/or profits,
rental or substitute equipment, costs of delay or for any other
special, indirect, incidental or consequential losses, costs or
damages.
REPRESENTATIONS EXCLUDED - IMT products are subject
to no expressed, implied or statutory warranty other than herein
set forth, and no agent, representative or distributor of the
manufacturer has any authority to alter the terms of this warranty
in any way whatsoever or to make any representations or
promises, express or implied, as to the quality or performance of
IMT products other than those set forth above.
CHANGE IN DESIGN - IMT reserves the right to make
changes in design or improvements upon its products without
imposing any obligation upon itself to install the same upon its
products theretofore manufactured.
Effective January, 1985
This parts manual is provided to the user to assist in servicing the equipment. It is the propertyof Iowa Mold Tooling Co., Inc and, as such,
may not be reproduced either whole or in part,whether by chemical, electrostatic, mechanical or photographic means without the
expressedwritten permission of an officer of Iowa Mold Tooling Co., Inc. One manual is provided with each piece of new equipment and
additional manuals may be obtained at a nominal price.
IOWA MOLD TOOLING CO., INC.
BOX 189, GARNER, IA 50438-0189
TEL: 515-923-3711
TECHNICAL SUPPORT FAX: 515-923-2424