DIAMO ONE, Руководство пользователя, Страница: 12 / 20

10
Adjusting for Hard Water
Water Type Soft Water Medium Water Hard Water
U.S. <180 ppm CaCO
3
180-360 ppm CaCO
3
>360 ppm CaCO
3
German <10° dH 10-20° dH >20° dH
French <18° fH 18-36° fH >36° fH
1.
If you have soft, medium, or hard water, you must
adjust your Diamo One to compensate for the water’s
level of hardness. Consult the table below to find out
what level of hardness your water has.
2.
Power off the Diamo One
(see Turning Off instructions)
.
IMPORTANT: Do not go to the next step until the Diamo One
is off and the Power button LED is dark. If you try to set the
HARD option below with the power ON, you will start the
descaling process instead.
3.
Choose one of the following:
A For SOFT water, press and HOLD the Power button
and the Single (Espresso) button at the same
time. When the Single button flashes three times,
you’re done.
B For MEDIUM water, press and HOLD the Power
button and the Double (Lungo) button at the
same time. When the Double button flashes three
times, you’re done.
C For HARD water, press and HOLD the Power button
and the Steam button at the same time. When the
Steam button flashes three times, you’re done.