Changing Parts
50
Installing Hard Disk Set Back into the Computer
1
Again, hold the base’s left side of the computer with your left hand and gently
tilt the computer towards.
2
Hold the hard disk set with your right hand and then insert the set into the hard
disk bay gently until it is fully mated.
3
Put your computer down on the table.
4
Fix the hard disk screw back against the keyboard frame.
Installing Keyboard Back to the Computer
1
Put the keyboard down on the top cover, move it forwards until the top is
stopped by the lid, and then adjust the location until the flat cable and its
connector are aligned.
2
Check and adjust the lock mechanism of flat cable connector. Make sure it is in
fully released condition.
Dialogue Flybook V2/V3 Series User’s Guide