4
4
Configuring the TX 4000 board
Using the configuration utility
After you install the TX 4000 board and the NaturalAccess Signaling Software, you
must assign a CP number to each TX 4000 board. Verify that you have completed
the steps described in the
installation summary
on page 16 before you proceed to
assigning a CP number
on page 22.
To assign a CP number, you will use the
txcpcfg
utility. Depending on the operating
environment, the
txcpcfg
utility is located in one of the following directories:
Operating system
Directory
Windows
Program Files\Dialogic\tx\bin\
UNIX
/opt/dialogic/tx/bin/
txcpcfg
enables you to perform the following types of changes to the configuration:
•
Assign a CP number
•
Add a board
•
Change a CP number
•
Move a board
•
Remove a board
•
Save configuration changes
For more information about
txcpcfg
, refer to the
Dialogic® TX Series SS7 Boards TX
Utilities Manual
.
Dialogic Corporation
21
