Dialog DA14585 Скачать руководство пользователя страница 28

 

 

UM-B-048 

 

DA14585/DA14586 Getting Started Guide with the Basic Development Kit   

 

                

 

User Manual 

Revision 2.0 

09-Jul-2018 

CFR0012-00 Rev 2  

28 of 29 

© 2018 Dialog Semiconductor 

11  Revision history 

Table 4: Revision history  

Revision 

Date 

Description 

1.0 

27-Aug-2015 

Initial version for DA1458x family with SDK 5. 

1.1 

20-Oct-2015 

Minor Update in Keil installation instructions. 

1.2 

22-Jan-2017 

Add DA14585/586. 

2.0 

09-Jul-2018 

First HTML released version. Keep only DA14585/586. 

12  Status definitions 

Table 5: Status Definitions 

Status 

Definition 

DRAFT 

The content of this document is under review and subject to formal approval, 
which may result in modifications or additions. 

APPROVED or 
unmarked 

The content of this document has been approved for publication. 

13  Disclaimer 

Information in this document is believed to be accurate and reliable. However, Dialog Semiconductor 
does  not  give  any  representations  or  warranties,  expressed  or  implied,  as  to  the  accuracy  or 
completeness  of  such  information.  Dialog  Semiconductor  furthermore  takes  no  responsibility 
whatsoever for the content in this document if provided by any information source outside of Dialog 
Semiconductor. 

Dialog  Semiconductor  reserves  the  right  to  change  without  notice  the  information  published  in  this 
document, including  without limitation the specification and the  design  of the related semiconductor 
products, software and applications. 

Applications,  software,  and  semiconductor  products  described  in  this  document  are  for  illustrative 
purposes  only.  Dialog  Semiconductor  makes  no  representation  or  warranty  that  such  applications, 
software and semiconductor products  will be suitable for the specified  use  without further testing or 
modification. Unless otherwise agreed in writing, such testing or modification is the sole responsibility 
of the customer and Dialog Semiconductor excludes all liability in this respect. 

Customer notes that nothing in this document may be construed as a license for customer to use the 
Dialog Semiconductor products, software and applications referred to in this document. Such license 
must be separately sought by customer with Dialog Semiconductor. 

All use of Dialog Semiconductor products, software and applications referred to in this document are 
subject to Dialog Semiconductor’s 

Standard Terms and Conditions of Sale

unless otherwise stated. 

Dialog and the Dialog logo are trademarks of Dialog Semiconductor plc or its subsidiaries. All other 
product or service names are the property of their respective owners. 

© 2018 Dialog Semiconductor. All rights reserved. 

Содержание DA14585






























Отзывы: