UM-B-048
DA14585/DA14586 Getting Started Guide with the Basic Development Kit
User Manual
Revision 2.0
09-Jul-2018
CFR0012-00 Rev 2
20 of 29
© 2018 Dialog Semiconductor
Figure 23: Blinky Project: Project Building
9.
Make sure you have a UART connection between your PC and the motherboard, as shown in
Figure 8
. Check the COM number on your PC.
10. Open Tera Term, choose the COM port from step 9, and click
OK
.
11. Select
Setup > Serial Port
to configure the port as shown in
Table 1
.
12. In Keil, select
Debug > Start/Stop Debug Session
.
Figure 24: Blinky Project: Start Debug Session
13. If a non-licensed version of Keil is used, the following dialog is displayed. Click
OK
.
Figure 25: Keil Lite Pop Up Window
14. Press
F5
or click the
Run
button to start code execution.
