UM-B-141
DA14531 SMARTBOND TINY™ MODULE Development
Kit Hardware User Manual
Target
User Manual
Revision 1.1
11-05-2020
CFR0012
23 of 29
© 2020 Dialog Semiconductor
5.10 First Steps with
DA14531 SMARTBOND TINY™ MODULE DEVKIT
The DA145xx DEVKT-P PRO-MB as well as
DA14531 SMARTBOND TINY™ MODULE DB come in
with a pre-defined default configuration. The initial steps that must be taken when the Daughterboard
is mounted on the PRO-MB are depicted in Figure 23.
Figure 23: DA145xx DEVKT-P PRO-MB First Steps Jumper Configuration with DA14531
SMARTBOND TINY™ MODULE DB attached
Steps to be followed
:
1. Remove SPI Data Flash Jumpers J1 1:2, 3:4, 5:6, 7:8, 9:10
2. Remove J5 1:3 header (LDO(U5) output at 3.0V)
