Dialog Semiconductor GreenPAK Advanced UM-GP-002, Руководство пользователя

Страница: 31 / 40

UM-GP-002
GreenPAK Advanced Development Platform
User Manual Revision 2.2 21-Feb-2020
CFR0012 31 of 40
© 2020 Dialog Semiconductor
Appendix A Electrical Specification
Mode Parameter Min Typ Max Units
General
Test Point Capacitance 19.5 -- -- pF
Input Leakage Current -- -- 14 nA
Max Current through Protection
Diode to V
DD
-- -- 200 mA
Ripple & Noise 20 -- 40 mVp-p
V
DD
Power Supply
Generator (V
DD
)
Voltage Range 1.5 -- 5.5 V
V
DD
Max Current -- -- 70 mA
Voltage Output Total Error --
±30
-- mV
Logic generator
Number of Channels
(TP2 to TP10, TP12 to TP20) -- -- 18 --
Output Voltage High -- V
DD
-- V
Output Voltage Low 0.4 -- 0.8 V
Max Current per TP -- -- 30 mA
Max Total Current per TPs -- -- 250 mA
Rise Time 4 -- 75 ns
Fall Time 4 -- 60 ns
Full-Scale Settling Time (0 to 5.5 V) 30 40 75 ns
Max Output Frequency 0.152 -- 5000 Hz
Max Number of Points -- -- 180 --
Sample Rate -- 10 -- kSPS
Signal Generator
Number of Channels
(TP3 to TP10, TP12 to TP18) -- -- 15 --
Output Voltage Range 0 -- 5.5 V
DC Output Impedance -- 0.5 --

Short-Circuit Current -- -- 30 mA
Min Output Voltage -- -- 19 mV
Output Total Error -- --
±7
mV
Output Frequency (SINE) 0.01 -- 2500 Hz
Max Number of Points -- -- 60 --
Sample Rate -- 10 -- kSPS
Virtual Button, V
DD
/GND,
Pull-Up/Down Driver
Output Level High -- V
DD
-- --
Output Level Low -- GND -- --
Strong Drive (V
DD
/GND) Resistance -- 100 --

Pull-Up/Down Resistance 3.5 5.6 8.5
k

Expansion Connector
Switch
Max Voltage -- -- 5.5 V
Continuous Current through Any
Terminal -- --
±30
mA
Switch On-Resistance -- 20 40

External V
DD
Switch On-Resistance -- 10 20

On Leakage Current -20 -- 20 nA