UM-GP-002
GreenPAK Advanced Development Platform
User Manual
Revision 2.2
21-Feb-2020
CFR0012
16 of 40
© 2020 Dialog Semiconductor
All these components can be found in components list. If there are no components on the work area -
make sure this component is enabled.
Table 2: Pin Configuration for Counter with Clock Enable
Pin #
Pin Name
Type
Pin Description
1
V
DD
PWR
Supply Voltage
2
Clock
Digital input
Digital input
3
Enable
Digital Input
Digital Input
11
GND
GND
Ground
20
Counter Output
Push-Pull output
Digital input
All components used in the project are shown in
, next step is to configure selected blocks.
Double click on Pin
20 to open “Properties” panel. Select “1x push pull” from the drop-down menu in
Pin
20 properties and hit “Apply” button.
Figure 12: Pin 20 Mode