DSP-100 User Manual
Page 4 of 25
DSP100_MAN_A
2.
Introduction
The DSP-100 vehicle detector has been specifically designed to handle most traffic applications and is very tolerant
of noise and cross-talk conditions. Working on virtually any size loop, the DSP-100 tunes itself automatically and
provides constant tracking to deal with environmental changes. The DSP-
100’s inherent noise filtering algorithms
allow it to work reliably in almost any electrical situation.
The DSP-100 is available with a relay or solid-state output. The "RT" and "ST" models have front-panel switches
to select both extension and delay timing. The operation of the timing functions can be modified by using the
Delay Inhibit (also known as Phase Green) input.
The detector uses a 10-pin MS connector for connections.
Figure 1: DSP-100T and DSP-100 Detectors
