Di-soric VS-05, Руководство пользователя

Страница: 46 / 54

Appendix D
Serial Commands
D-2
VS-05 Smart Camera Guide
SET {tagname}{value}
Sets value of a global tag.
The tagname must correspond to one of the supported tags within the
device.
The value can contain spaces.
The command is terminated by a carriage return and/or line feed
character.
The value can be a list of comma-separated items to set a sequence of tags:
Send
SET int1 1, 2, 3
to set int1 = 1, int2 = 2, int3 = 3.
The AVP service allows setting of step and datum information from the job
tree using forward slash ‘/’ in the symbolic name path.
SET
avp/insp1/snapshot1/acq1/gain 2.0
paths are not case-sensitive and do
not need to be fully qualified if unique.
SET avp/acq1/gain 2.0
will set the same gain value if there is only one
acquire.
Control tags in the AVP service such as
START
,
STOP
, and
TRIGGER
act
as momentary switches.
SET avp.start 1
is equivalent to the
ONLINE
command.
avp.start
will reset immediately and always read as
0
.
Success Return:
On success will return
!OK
followed by an echo of the
command. For example:
!OK SET matchstring1 ABCD
Fail Return:
On failure will return
!ERROR
followed by the reason for the
failure. For example:
!ERROR Tag matchstring66 not found
GET {tagname}
Gets value of a global tag.
The tagname must correspond to one of the supported tags within the
device.