Di-LOG DL9205, Руководство по эксплуатации

Страница: 17 / 32

DC Voltage Measurements AC Voltage Measurements
Warning:
RISK OF ELECTROCUTION. THE PROBE TIPS MAY NOT
BE LONG ENOUGH TO CONTACT THE LIVE PARTS IN-
SIDE SOME 240V OUTLETS FOR APPLIANCES BECAUSE
THE CONTACTS ARE RECESSED DEEP IN THE OUTLETS.
AS A RESULT, THE READING MAY SHOW 0 VOLTS WHEN
THE OUTLET ACTUALLY HAS VOLTAGE ON IT. MAKE
SURE THE PROBE TIPS ARE TOUCHING THE METAL
CONTACTS INSIDE THE OUTLET BEFORE ASSUMING
THAT NO VOLTAGE IS PRESENT.
Caution:
DO NOT MEASURE AC VOLTAGES IF A MOTOR ON
THE CIRCUIT IS BEING SWITCHED ON OR OFF. LARGE
VOLTAGE SURGES MAY OCCUR THAT CAN DAMAGE
THE METER.
1. Set the function switch to the V AC position.
2. Insert the black test lead banana plug into the
negative (COM) terminal and the red test lead
banana plug into the positive (V)terminal.
3. Connect the test probe tips to the circuit
under test.
4. Read the voltage in the display. The display will
indicate the proper decimal point, value and
symbol (AC, V, etc.)