Di-LOG DL9205, Руководство по эксплуатации

Страница: 24 / 32

Diode Test
Warning:
TO AVOID ELECTRIC SHOCK, DO NOT TEST ANY DIODE
THAT HAS VOLTAGE ON IT.
1. Set the function switch to position.
2. Press the button until the symbol appears in
the display.
3. Insert the black test lead banana plug into the
negative (-) terminal (COM) and the red test lead
banana plug into the positive (+) terminal(Ω).
4. Connect the test probe tips to the diode or
semiconductor junction you wish to test. Note
the meter reading
5. Reverse the probe polarity by switching probe
position. Note this reading.
6. The diode or junction can be evaluated as follows:
A. If one reading shows a value and the other
reading shows OL, the diode is good.
B. If both readings show OL, the device is open.
C. If both readings are very small or 0, the device is
shorted.
Note:
The value indicated in the display during the diode
check is the forward voltage.