Safety Information
Transport and Storage
Please keep the original packaging for later transport,
e.g. for calibration. Any transport damage due to
faulty packaging will be excluded from warranty claims.
In order to avoid instrument damage, it is advised to
remove batteries when not using the instrument over
a certain time period. However, should the instrument
be contaminated by leaking battery cells, you are
kindly requested to return it to the factory for cleaning
and inspection.
Instruments must be stored in dry and closed areas.
In the case of an instrument being transported in
extreme temperatures, a recovery time of minimum 2
hours is required prior to instrument operation.
Safety
The Clamp Meter DL6507 has been manufactured
and tested to comply with the safety regulations
for electronic measuring equipment contained in
DIN VDE 0411 and EN 61010, and left our works in a
safe condition.
To maintain this condition, the user must observe the
safety instructions contained in this Instruction Manual.
To avoid electric shock, safety measures must
be observed when working with voltages higher
than 120 V (60 V) DC or 50 V (25 V) RMS AC.
The values in brackets apply to medical and
agricultural applications.