DHS Fitness DHS 9520, Руководство пользователя

Страница: 34 / 46

33
INCLINE
（
3 6 9 12 15 18
）：
Adjust the incline quickly. Notice: When incline low to 0,then you could fold
treadmill.
: button
:Volume -
button
: Mute button
:Previous one button
Next one button
Left hand pulse button :Adjust the incline
Right hand pulse button:Adjust the speed.
4. MAIN FUNCTION
Turn on the power, all the windows lit 1 seconds, then enter the standby mode.
4.1 START-UP QUICKLY (MANUAL):
Connect power and put on the safety key.Press ‘PROGRAM’ button to choose cycle
mode .ProgramP1->P2->P3->P4>P5->P6->P7->P8->P9->P10->P11->P12->P13->P14->P15->P16->
P17->P18->P19->P20>U1>U2>U3>FAT. Press
‘
START
’
button, the window display 3333
－
2222
－
1111.and each minus one buzzer chirping.the machine will run at the lowest speed.. you can press
“
SPEED+
”“
SPEED-
”
or “
”“
INCLINE-
”
to change the speed or the incline. When
it counts down to 0, the machine will stop smoothly. Certainly, you can press
‘
STOP
’
button or take
out the safety key from the computer to stop the machine.
4.2 COUNT DOWN MODE:
Press the ‘ MODE’ button, it can choose time countdown mode, distance count down mode, calories
countdown mode, and the window will show the default data and glitter. Press
‘
START
’
button, the
window display 3333
－
2222
－
1111.and each minus one buzzer chirping.the machine will run at the
initial speed 1KM/H, you can press “ SPEED+” “ SPEED-” or “” “ INCLINE-” to change the
speed or the incline. When it counts down to 0, the machine will stop smoothly. Certainly, you can press
‘ STOP’ button or take out the safety key from the computer to stop the machine.
4.3 BUILT-IN PROGRAMS:
Press the “PROGRAM’ button, select P1 --- P20 any one of them shall be built-in program, the
time window displays the default value of TIME and flashing, press the
“SPEED+-“/”-“ button to adjust the time required. Built-in program is divided into 20
segments, each time the running time for the set / 20. Press the START button, treadmill running
according to the first paragraph in 3 seconds countdown speed and incline up, when ended,
automatically enter the next period of operation, speed and incline at the same time automatically
adjust the value for the segment. Finished running all segments. Program ended, the speed slow
down to stop the treadmill, incline return to 0.
During the operation speed and incline can be adjusted up and down. But in the next period will be
automatically adjusted to the program defaults. Movement can also be directly pressed STOP key
or disconnect safety key to stop the run. Built-in program data, see Table
4.4 USER DEFINED PROGRAM
There are three program U1, U2, U3 for user defined.
Press “PROGRAM” continuously under standby mode until window display U1-U3,press “MODE” to