Dhollandia DH-S Series, Руководство по установке

Страница: 27 / 82

26
DHOLLANDIA
9.2 POSITION OF THE MOUNTING BRACKETS ON THE ALUMINIUM SLIDING TUBES FOR DH-SM(R) 1500-
2000 KG
•
Refer to the FITTING DRAWING for confirmation of the correct position of the mounting brackets of the sliding tubes.
•
If not available (e.g. fitting of stock liftgate), refer to the TECHNICAL SUMMARY to determine the positions of the mounting brackets.
1. The position of the rear mounting brackets is determined by the work position of the liftgate. [1 in Figure 9.13]
2. The position of the front mounting brackets [2 in Figure 9.13] is determined by the overhang dimension (M) [3 in Figure 9.13].
When the platform is not mounted flush with the rear end of the vehicle, correct the overhang dimension (M) accordingly.
3. Follow the instructions for the third / middle mounting bracket [4 in Figure 9.13].
WARNING
•
It is important to position the mounting brackets of the sliding tubes properly. Incorrect positioning can lead to overload situations
and premature failure of the liftgate. [Figure 9.]
•
For side-mounted sliding tubes, wider brackets are available to mount the liftgate alongside the spring hangers of a mechanical
vehicle suspension. [Figure 9.]
MIN. MAX.
D1
7
7
8
"
(200mm) 13
3
4
"
(350mm)
D2 0” 4” (100mm)
Figure 9.13
❷
❹
❶
❸
3 / side