Dhollandia DH-S Series, Руководство по установке

Страница: 19 / 82

18
DHOLLANDIA
•
For SIDE-MOUNTING on truck chassis, when changing the fitting height, MFT ; ensure that the drill holes in the mounting brackets
for the aluminium sliding tubes still fall within the chassis [see Figure 6.10].
•
Refer to the TECHNICAL SUMMARY of the liftgate for details on the correlation between the arm length, the fitting height and the
required overhang [see Figure 6.12].
•
For any given platform depth, PD ; the required overhang VARIABLE can be reduced by 4” ( 100mm) with the option (S245.S) on the
platform [see Figure 6.11].
•
Refer to the TECHNICAL SUMMARY of the liftgate to define:
1. The minimum body width BWO.
2. The cut-out dimensions BCW , CHW, determining the size of the mounting plates for the vehicle rear lights and the slots for
the lift arms / cylinders of the lift. Or, the opposite way around, the dimensions indicating which arm width will suit a
predetermined rear body configuration. [see Figure 6.2]
•
Adjust the rear side of the body accordingly. BCW and CHW depend on the arm width LAC . LFT depends on the fitting height MTG .
•
The height of the rear cross member LFT varies also with the shape of the platform: standard platform hands or option (S245.S).
[see Figure 6.13]
Option S245.S
Figure 6.11
Figure 6.10
Figure 6.12
Figure 6.2
4”
4”