Dhollandia DH-P1, Руководство по эксплуатации, Страница: 13 / 48

12
DHOLLANDIA
6.2 SAFETY DEVICES

DHOLLANDIA lifts are equipped with a multiple safety devices to enable its intended use with a maximum degree of safety for
the operator, the wheelchair occupant on the platform and any incidental bystanders. The following safety devices are
incorporated on the DH-P*... Series:
N° Description Image
1 Non-slip surface: the platform surface incorporates an non-slip profiling to
prevent the operator and platform occupants from slipping and falling.
[W]
→
Platform in mesh steel, evacuating rainwater, snow, dirt, etc. quickly
through the platform surface.
[C]
→
Steel platform frame filled with aluminium profiles with non-slip ripples.
2 Roll stop: roll stop mounted at the outboard platform edge. The roll stop is tilted
up automatically when the platform leaves the ground, it is tilted down
automatically when the platform touches the ground.
The roll stop prevents the wheelchair from slowly and unexpectedly rolling off the
platform during lifting and lowering. It is not designed to stop fast and powered
movements. See also 7.4 on page 22
3 Guard rail(s) [W]: fall protections mounted at both sides of the DH-PH2* platform
(*), protecting the wheelchair occupant and his attendant from falling off the
platform. The guard rails are deployed and stowed automatically in
synchronisation with the movement of the platform.
(*) 1 guard rail only on the 1-arm lift DH-PH1*
4 Bridge plate: plate mounted at the inboard platform edge, used to bridge any gap
between the platform and the vehicle floor when the platform is raised to its
maximum height.
The bridge plate tilts down automatically as the platform approaches the vehicle
floor. It tilts up automatically as the platform lowers to the ground.
It also forms a toe-guard for the operator and the wheelchair occupant while
travelling up / down on the platform.