Dhollandia DH-P1, Руководство по эксплуатации, Страница: 10 / 48

9
DHOLLANDIA
DH-PH1* / DH-P1*
●
TERMINOLOGY
See figure below for parts corresponding to numbers in this table
# Description
1 Main column: steel assembly incorporating the lift frame, lift arm and lift cylinder. The main column is mounted in a fixed
position on the vehicle floor and additionally attached to the side of the vehicle body. Following types are available:
1. Standard: fixed column. The main column and lift frame are one and the same assembly. The platform has only
1 travel position just in front of the vehicle doors.
2. Option OWU006: free-access execution. The lift frame can pivot on the main column. The platform can swing
from a travel position against the side of the vehicle body to a work position in the door aperture.
2 Lift frame: steel assembly incorporating the lift arm and lift cylinder, who together carry the platform.
3 Lift arm + lift cylinder: a single lift arm actuated by a lift cylinder, used to lift / lower the platform and its load (= functions
UP / DOWN).
4 Platform: carries the load during loading / unloading, lifting / lowering. It is equipped with a bridge plate at the inboard
platform edge and a roll stop at the outboard platform edge. The guard rail for the platform is integrated in the lift arm.
[W]
→
Platform in mesh steel, evacuating rainwater, snow, dirt, etc. quickly through the platform surface.
[C]
→
Steel platform frame filled with aluminium profiles with non-slip ripples.
5 Bridge plate: plate mounted at the inboard platform edge, used to bridge any gap between the platform and the vehicle
floor when the platform is raised to its maximum height.
6 Roll stop: roll stop mounted at the outboard platform edge. The roll stop is tilted up automatically when the platform leaves
the ground, it is tilted down automatically when the platform touches the ground.
[W]
→
The roll stop prevents the wheelchair from slowly and unexpectedly rolling off the platform during lifting and lowering.
It is not designed to stop fast and powered movements. See also 7.4 on page 22
7
Guard rail [W]: fall protection at the side of the platform, protecting the wheelchair occupant and his attendant from falling
off the platform. The guard rail is integrated in the lift arms. It is deployed and stowed automatically in synchronisation with
the movement of the platform.
8 Flashing platform lights: used to make the platform visible to other parties in traffic.
9 Platform lock: Mechanical lock to prevent the platform from falling open in case of accidental loss of hydraulic pressure.
The lock incorporates a gas cylinder and only engages in case of a slow hydraulic pressure loss. In normal conditions at
full pressure, it remains inactive.
10 Pivot lock [OWU006 = pivoting frame]: unlock and lock the pivot lock to pivot the lift frame from a travel position against
the side of the vehicle body to a work position in the door aperture and vice versa.
11 Wander lead with spiral cable: control box to execute all functions DEPLOY – UP – DOWN - STOW. The wander lead
features 2 buttons for 4 functions.
12
Hydraulic power pack: contains the electric motor driving the hydraulic pump, the oil tank, and the control valves.