Dhollandia DH-AR Series, Руководство по эксплуатации

Страница: 34 / 46

33
DHOLLANDIA
Remove the locking pin from the support
frame of the hydraulic stabilising legs.
Operate LEG DOWN to lower the
stabilising legs into work position. If
stabilisers are not available, and if
instructions of vehicle manufacturer allow
so, lower air suspension of vehicle and
block it in the lowest position.
Operate POWER OPEN to open the
platform over a minimum angle of 30°.
Operate GRAVITY OPEN to continue to open the platform by its
own weight, until the outboard platform edge lands at the ground.
and mechanical support legs are in firm contact with the ground.
Make sure the outboard platform edge and the mechanical
support legs are in firm contact with the ground. Use solid
support blocks if working on soft terrain (sand, gravel, etc.) and
adjust the length of the support legs if necessary.
Make sure you comply with load charts and instructions at all
times
Load and unload in accordance to the instructions and guidelines
in this manual.
Loading and unloading