Dhollandia DH-AB Series, Руководство по эксплуатации

Страница: 20 / 37

19
DHOLLANDIA
9 OPERATION
9.1 USE OF THE PALLET JACK MECHANISM

The pallet jack mechanism is used to move the mobile column lift around
in a safe and practical way, to push the columns under the tires of the
vehicle or the pull them from underneath. Use the following instructions to
operate the mechanism:
1. Position the handle in position [3] to activate the pump. Make pumping
movements with the handle bar to jack up the lift columns .
2. Leave the handle in idle position [2] and move the mobile column lift
to the desired location.
3. Pull the handle to position [1] to lower the lift columns to the ground.
Make sure the lift columns are fully resting on the ground prior to lifting
any vehicles.
4. When finished, leave the handle behind in idle position [2].

If the operator forgets to lower the lift columns to the ground prior to lifting
a vehicle, a fail safety on the pallet jack mechanism will automatically do the
same thing as the vehicle is lifted off the ground.
WARNING

The pallet jack mechanism shall ONLY be used to move the lift columns around.

NEVER use the mobile column lift to move vehicles, machines or other objects to a different position. Using the mobile column
lift for transportation purposes can put the operator and bystanders at risk of serious bodily injury or death. Hence, it can lead
to property damage to the mobile column lift and the vehicle or objects being transported with it.
9.2 ELECTRIC CONTROL BOX

The master column is equipped with the electric control box. It incorporates the following elements:
1 Main power switch: turn the switch clockwise to switch the
main power to the mobile column lift on. Turn it counter
clockwise to switch the main power off.
2 Indicator light: testimony light indicating the on / off status of
the main power switch.
3 Configuration selector: turn the switch counter clockwise to
activate only 1 mobile column lift (2 lift columns). Turn it
clockwise to use 2 mobile column lifts (4 lift columns) in a
synchronised way.
4 LIFT button: push the button to raise the lift forks and the
vehicle.
5 LOWER button: push the button to lower the lift forks and the
vehicle.
6 SAFETY DOWN button: push the button to lower the lift forks
and the vehicle onto the safety locks on the lift column.








