6
INSTALL THE CLAMP SET:
1.
Follow the below instruction to plug two connectors of the clamp set to the
back of the tester.
2.
Insert the top three connectors by matching the color of the connectors.
NOTE: ALWAYS HOLD THE CONNECTORS INSTEAD OF THE WIRES WHEN
INSERTING OR REPLACING THE CLAMP SET.
REPLACE THE CLAMP SET:
1. Hold the connectors and pull them off from the back off the tester.
2. Insert a new clamp set by following above install the clamp set instruction.
NOTE: ALWAYS HOLD THE CONNECTORS INSTEAD OF THE WIRES WHEN
INSERTING OR REPLACING THE CLAMP SET.
