background image

GB-H-152 GAS BOOSTER PACKAGE OPERATION AND MAINTENANCE MANUAL 

© 2008 DH Instruments, a Fluke Company 

 

 

 

 

 

 

 

  This equipment described in this manual is designed and manufactured for the intended purpose of 

generating high pressure gas and regulating a high gas pressure output.  Certain precautions need to be 
followed during installation and operation of this device.  Reading and understanding the material is essential 
to the safe and correct operation of the unit. 

 
 

  Pressurized equipment is potentially dangerous.  The equipment described in this manual generates and 

controls very high gas pressures.  It should not be operated by anyone who has not thoroughly familiarized 
themselves with this manual.  Additional training in general and pressure specific safety procedures will help 
assure protection from harm or damage to personnel or property.  Responsibility for the proper and safe 
operation of this instrument rests with the user. 

 
 

  Do not use oxygen.  This instrument is not compatible with the use of oxygen.  Hydrocarbon elastomers 

and lubricants are present. 

 
 

  High pressure liquids and gases are potentially hazardous.  Energy stored in these liquids and gases 

can be released unexpectedly and with extreme force.  High pressure systems should be assembled and 
operated only by personnel who have been instructed in proper safety practices. 

 

©

 2008 

DH Instruments, a Fluke Company

  All rights reserved. 

Information in this document is subject to change without notice.  No part of this document may be reproduced or transmitted in any 
form or by any means, electronic or mechanical, for any purpose, without the express written permission of 

DH Instruments, a 

Fluke Company  

4765 East Beautiful Lane  Phoenix  AZ  85044-5318  USA. 

DH Instruments 

makes every effort to ensure the accuracy and quality of it’s published materials; however, no warranty, expressed 

or implied, is provided.  

DH Instruments 

disclaims any responsibility or liability for any direct or indirect damages resulting from the 

use of the information in this manual or products described in it.  Mention of any product or brand does not constitute an 
endorsement by 

DH Instruments 

of that product or brand.  This manual was originally composed in English and was subsequently 

translated into other languages.  The fidelity of subsequent translations cannot be guaranteed.  In case of conflict between the 
English version and another language version, the English version predominates. 

DH Instruments

DH

 , 

DHI

, PPC, PPCH-G, PPC3, RPM4 and CalTool are trademarks, registered and otherwise of  

DH 

Instruments, a Fluke Company.

Swagelok

 is a registered trademark of the Swagelok Company. 

Teflon

 is a registered trademark of the 3M Corporation. 

Document No. 550162a 
080423 
Printed in the USA. 

Содержание GB-H-152-100M































Отзывы: