VW MiniLogger, 2018/8/24
7
Setting Up
Preparations
1.
Check that the MiniLogger’s batteries are in place.
2.
Connect the MiniLogger to the PC.
3.
Open Logger Manager
4.
Choose VW MiniLogger
Edit Settings
1.
Click on “Set Up”.
You should see a screen
similar to this.
Set MiniLogger
Click “Set General.”
Device ID:
Enter an
identifier for the
MiniLogger.
Change the Data For-
mat
(Campbell, Slope
ID or CSV). If you are
using a spreadsheet pro-
gram to analyze the
data, it is suggested that
you select CSV format.
When Logger Memory is
Full:
Choose either stop recording or continue recording.
In the Stop mode, the MiniLogger stops recording when its
memory is full. It will not record again until you retrieve the
data and clear its memory.
In the Continue mode, the MiniLogger continues recording
readings when its memory is full. It overwrites the earliest read-
ings with the most recent readings.
