manualshive.com logo in svg

DFI PA33, Руководство пользователя, Страница: 63 / 70

Поделиться
Скачать
DFI PA33 Скачать руководство пользователя страница 63

63

4

Supported Softwares

4.2  VIA Hardware Monitoring System

The system board comes with the VIA Hardware Monitoring System

utility contained in the provided CD. It is capable of monitoring the

system’s hardware conditions such as the temperature of the

processor and system, voltage, and speed of the CPU and chassis

fans. It also allows you to manually set a range to the items being

monitored. If the values are over or under the set range, a warning

message will pop-up. The utility can also be configured so that a

beeping alarm will sound whenever an error occurs. We recommend

that you use the  “Default Setting” which is the ideal setting that

would keep the system in good working condition.

Note:

Use this utility only in Windows

®

 95 or Windows

®

 98 operating

system.

To install the utility, insert the CD into a CD-ROM drive. The autorun

screen (Main Board Utility CD) will appear. Click the Hardware

Monitoring System button to install the utility. Refer to its “readme”

file for instructions on using the utility.

Содержание PA33







































































Отзывы:

Нет отзывов