49
3
Award BIOS Setup Utility
Resume On Ring/LAN
This field supports two functions.
•
With an external modem installed, the Modem Ring-on function
allows your system to power-on to respond to incoming calls. The
external modem may be connected to the COM 1 or COM 2
serial port.
•
With a LAN card installed, the Wake-On-LAN function allows
the network to power-on a Soft Power Down (Soft-Off) PC.
However, if your system is in the Suspend mode, you can wake
up the system only through an IRQ or DMA interrupt. Refer to
Wake-On-LAN Connector in chapter 2 for more information.
Resume On Alarm
Enabled
When Enabled, Date (of Month) and Timer
(hh:mm:ss) will appear right below this field. You can set
the date and time you would like the Soft Power
Down (Soft-Off) PC to power-on. However, if the
system is being accessed by incoming calls or the
network (Resume On Ring/LAN) prior to the date and
time set in these fields, the system will give priority to
the incoming calls or network.
Disabled
Disables the automatic power-on function. (default)
Date (of Month)
0
The system will power-on everyday according to the time
set in the Timer (hh:mm:ss) field.
1-31
Select a date you would like the system to power-on. The
system will power-on on the set date, and time set in the
Timer (hh:mm:ss) field.
Timer (hh:mm:ss)
This is used to set the time you would like the system to power-on.
If you want the system to power-on everyday as set in the Date (of
Month) field, the time set in this field must be later than the time of
the RTC set in the Standard CMOS Setup.