DFI P5BVP, Руководство пользователя

Страница: 31 / 82

2
Hardware Installation
31
Connecting the Serial Ports
Two serial port cables mounted
on a card-edge bracket are
provided with the system board.
Connect one serial port cable to
connector J2 for COM 1
primary serial port and the other
serial port cable to connector J3
for the COM 2 secondary serial
port. Make sure the colored
stripes on the ribbon cables are
aligned with pins 1 of connectors
J2 and J3. Mount the card-edge
bracket to the system chassis.
Port Configuration
Serial Port 1
Serial Port 2
COM1
3F8h*
3F8h
COM2
2F8h
2F8h*
COM3
3E8h
3E8h
COM4
2E8h
2E8h
* Default
The serial ports use the following system I/O addresses:
2.2.5 Connecting the Ribbon Cables and Wires of
the Ports and Connectors
2.2.5.1 Serial Ports
The built-in serial ports are RS-232C asynchronous communication
ports with 16C550A-compatible UARTs that can be used with
modems, serial printers, remote display terminals, and other serial
devices. You can set the serial ports’ I/O address in the Integrated
Peripherals setup of the Award BIOS.