38
2
Hardware Installation
The front audio is disabled.
The rear audio is enabled.
The front audio is enabled.
The rear audio is disabled.
Pins 5-6 and 9-10 short
(default)
Pins 5-6 and 9-10 open
Driver Installation
Install the “Audio Drivers”. An audio software application program
will at the same time be installed into your system. Refer to chapter
4 for more information.
Front Audio
The front audio connector (J16) allows you to connect to the line-
out and mic-in jacks that are at the front panel of your system.
Using this connector will disable the rear audio’s line-out and mic-in
functions.
Remove the jumper caps from pins 5-6 and pins 9-10 of J16 prior
to connecting the front audio cable connector. Make sure pin 1 of
the cable connector is aligned with pin 1 of J16. If you are not using
this connector, make sure to replace the jumper caps back to their
original pin locations.
2-channel
Line-in
Line-out
Mic-in
4-channel
Line-in
Front R/L
Rear R/L
6-channel
Center/Subwoofer
Front R/L
Rear R/L
Light Blue
Lime
Pink
