41
2
Hardware Installation
The nF2 U400SG-AGF system board is equipped with two IEEE
1394 connectors at locations J30 (IEEE 1394_1) and J33 (1394_2)
for connecting 1394 devices. Your 1394 ports may come mounted
on a card-edge bracket. Install the card-edge bracket to the system
chassis then insert the connector that is attached to the 1394 port
cable to J30 or J33. Make sure pin 1 of the cable connector is
aligned with pin 1 of J30 or J33.
BIOS Setting
Enable or disable the onboard 1394 in the Integrated Peripherals
submenu (“Onboard Device” section) of the BIOS. Refer to chapter
3 for more information.
2.6.3 IEEE 1394 (nF2 U400SG-AGF only)
W
1394_2
+12V (fused)
1
TP
A
+
Ground
TPB+
+12V (fused)
Key
TP
A-
Ground
TPB-
Ground
2
1 0
9
1394_1