83
3
Award BIOS Setup Utility
3.1.7 PC Health Status
3.1.7.1 CPU Fan Protection
The CPU Fan Protection function, when enabled, has the capability of
monitoring the CPU fan during system boot-up and will automatically
power-off the system once it has detected that the CPU fan did not
rotate. Set this field to Disabled if you are not using this function. Refer
to “CPU Fan Connector with CPU Fan Protection Function” in chapter
2 for more information.
3.1.7.2 CPU Temp. Prot. Function and CPU Temp. Prot. Alarm
The CPU Temperature Protection function has the capability of
monitoring the CPU’s temperature during system boot-up. To use this
function, set the “CPU Temp. Prot. Function” field to “Enabled” then select
the desired CPU temperature limit in the “CPU Temp. Prot. Alarm” field.
Once the system has detected that the CPU’s temperature exceeded
the limit, 5 warning beeps will sound and at the same time, a warning
message will appear on the boot-up screen instructing you to press
<Del> in order to enter the main menu of the BIOS. If you did not
press <Del>, the system will automatically power-off after the 5
warning beeps. You may either:
The settings on the screen are for reference only. Your version may not be
identical to this one.
Phoenix - AwardBIOS CMOS Setup Utility
PC Health Status
Show PC Health When POST
CPU Fan Protection
CPU Temp. Prot. Function
CPU Temp. Prot. Alarm
Current System Temp.
Current CPU Temperature
Current CPU FAN Speed
Current Chassis FAN Speed
+3.3
+5
+12
VBAT(V)
5VSB(V)
Shutdown Temperature
Enabled
Disabled
Disabled
60
27C/80F
37C/98F
0 RPM
0 RPM
Disabled
Item Help
Menu Level
↑↓→←
Move
F6:Fail-Safe Defaults
F7:Optimized Defaults
F1:General Help
Enter:Select
F5:Previous Values
+/-/PU/PD:Value
F10:Save
ESC:Exit
3.35 V
4.90 V
11.85 V
3.24 V
5.37 V
V
V
V
X
