DFI KH960-CM238 Скачать руководство пользователя страница 63

Страница: 63 / 77

www.dfi.com

Chapter 7 Intel AMT Settings

Chapter 7

4. Enter a new password in the space provided under Intel(R) ME New Password then press

Enter. The password must include:

• 8-32 characters

• Strong 7-bit ASCII characters excluding

: ,

and

”

characters

• At least one digit character (0, 1, ...9)

• At least one 7-bit ASCII non alpha-numeric character, above 0x20, (e.g. !, $, ;)

• Both lower case and upper case characters

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1197

MAIN MENU

MEBx Login

> Intel (R) ME General Settings

> Intel (R) AMT Configuration

MEBx Exit

Intel(R) ME Password

[

↑↓

] = Move Highlight [Enter] = Select Entry [Esc]= Exit

Intel (R) ME New Password

5. You will be asked to verify the password. Enter the same new password in the space pro-

vided under “Verify Password”, then press “Enter”.

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1197

MAIN MENU

MEBx Login

> Intel (R) ME General Settings

> Intel (R) AMT Configuration

MEBx Exit

Intel(R) ME Password

[

↑↓

] = Move Highlight [Enter] = Select Entry [Esc]= Exit

Verify Password

6. Select “Intel(R) ME General Settings”, then press “Enter”.

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1197

MAIN MENU

> Intel (R) ME General Settings

> Intel (R) AMT Configuration

MEBx Exit

[

↑↓

] = Move Highlight [Enter] = Select Entry [Esc]= Exit

Intel(R) Management Engine BIOS Extension v11.0.0.0005/Intel(R) ME v11.0.0.1197

MAIN MENU

MEBx Login

> Intel (R) ME General Settings

> Intel (R) AMT Configuration

MEBx Exit

Intel(R) ME Password

[

↑↓

] = Move Highlight [Enter] = Select Entry [Esc]= Exit

3. Select “MEBX Login”. You will be prompted for a password. The default password is “ad-

min”. Enter the default password in the space provided under Intel(R) ME Password and

then press “Enter”.

Содержание KH960-CM238














































































Результаты поиска

Содержание KH960-CM238

Отзывы:

Бренды по названию

Популярные бренды

DFI KH960-CM238, Руководство пользователя

Результаты поиска

Содержание KH960-CM238

Отзывы:

Бренды по названию

Популярные бренды