![background image](http://html.mh-extra.com/html/dfi/g7l332-l/g7l332-l_user-manual_2491170108.webp)
B
108
System Error Message
Hard Disk(s) fail (80)
HDD reset failed.
Hard Disk(s) fail (40)
HDD controller diagnostics failed.
Hard Disk(s) fail (20)
HDD initialization error.
Hard Disk(s) fail (10)
Unable to recalibrate fixed disk.
Hard Disk(s) fail (08)
Sector Verify failed.
Keyboard is locked out - Unlock the key
The BIOS detects that the keyboard is locked. Keyboard controller
is pulled low.
Keyboard error or no keyboard present
Cannot initialize the keyboard. Make sure the keyboard is attached
correctly and no keys are being pressed during the boot.
Manufacturing POST loop
System will repeat POST procedure infinitely while the keyboard
controller is pull low. This is also used for the M/B burn in test at
the factory.
BIOS ROM checksum error - System halted
The checksum of ROM address F0000H-FFFFFH is bad.
Memory test fail
The BIOS reports memory test fail if the memory has error(s).
Содержание G7L332-L
Страница 1: ...935 G7L321 000G A09400904 G7L332 L System Board User s Manual ...
Страница 96: ...96 4 Supported Software 4 Click Finish Reboot the system for the driver to take effect ...
Страница 100: ...100 4 Supported Software 3 Click Finish Reboot the system for DirectX to take effect ...
Страница 102: ...102 4 Supported Software 5 Click Finish to exit installaion 4 Click Install to begin installation ...