32
If you choose “System” in the Security Option, you will be prompted for
a password every time you cold boot your system or access setup. If
you choose “Setup”, you will be prompted for a password only when
trying to access setup.
If the changes you made are incorrect or you change your mind, press
<F6> or <F7> to return to the default settings. Press <Esc> after mak-
ing the changes to return to the main menu.
Chipset Features Setup
The G586VPM/C uses VLSI chipset. The Chipset Features Setup allows
you to modify some functions to optimize system performance. It also
allows you to enable, disable or select the port address of the built-in
serial ports, parallel port, floppy disk controller and hard disk controller.
If you press <Enter>, a screen similar to the one below will appear.
Use the arrow keys to move the highlight bar to the option you wish to
change or modify. Use the <Page Up>, <Page Down>, <+> or <-> keys
to make the corresponding changes.
If the changes you made are incorrect or you change your mind, press
<F6> or <F7> to return to the default setting.
