37
Warning:
Do not attempt to do a low-level format, or you may cause serious dam-
age to the drive. IDE disk drives are already low-level formatted, with
any bad-track errors entered, when shipped by the drive manufacturer.
Use the arrow keys to select an option and press <Enter> to accept the
option. Press <Esc> when done.
Save & Exit Setup
When all the changes have been made, highlight “Save & Exit Setup”
and press <Enter>. The following message will appear:
Save to CMOS and Exit (Y/N)? N
Type “Y” and press <Enter>. The following message will appear:
Reboot System (Y/N)? N
Type “Y” and press <Enter>. The modifications you have made will be
written into the CMOS memory, and the system will reboot. You will
once again see the initial diagnostics on the screen. If you wish to
make additional changes to the setup, press <Ctrl> <Alt> <Esc> simul-
taneously or <Del> after the memory testing is completed.
Exit Without Saving
When you do not want to save the changes you have made, highlight
this option and press <Enter>. The following message will appear:
Quit Without Saving (Y/N)? N
Type “Y” and press <Enter>. The system will reboot and you will once
again see the initial diagnostics on the screen. If you wish to make any
changes to the setup, press <Ctrl> <Alt> <Esc> simultaneously or
<Del> after the memory testing is completed.
