PCI/ISA System Board
2-22
u
Installation Overview
Zero Insertion Force (ZIF) Socket
To install an upgrade CPU in the G586OPA, follow the
steps below.
1. Make sure the handle on the side of the ZIF socket
is up. To raise the handle, push down and pull it out
to the side a little and raise it as far as it will go.
The top plate will slide back. Do not use screw
drivers or other tools to open the socket, or damage
may occur to the system or socket. It may be
necessary to initially apply a small amount of
sideways force to free the handle from its retaining
“tab.” Once clear of the “tab,” the lever will open
easily.
Содержание G586OP
Страница 1: ...G586OP A Rev 0 SystemBoard User sManual D26250223 ...
Страница 98: ...G586OP A Rev 0 SystemBoard User sManual ...
Страница 99: ...G586OP A Rev 0 SystemBoard User sManual 26250223 ...
