46
3
Award BIOS Setup Utility
PCI/VGA Act-Monitor
Enabled
When the system enters the Suspend mode, it will check
the status of the VGA. If the VGA is active, it will not turn
the screen off. If the VGA is inactive, it will turn the screen
off.
Disabled
When the system enters the Suspend mode, it will
immediately turn the screen off without checking the
status of the VGA.
Soft-Off by PWR-BTTN
This category allows you to select the method of powering off your
system.
Hold 4 Sec.
Regardless of whether the Power Management field is
enabled or disabled, if the power button is pushed
and released in less than 4 sec, the system enters the
Suspend mode. The purpose of this function is to
prevent the system from powering off in case you
accidentally hit or pushed the power button. Push
and release again in less than 4 sec to restore.
Pushing the power button for more than 4 seconds
will power off the system.
Instant-Off
Pressing and then releasing the power button at
once will immediately power off your system.
PWR Lost Resume State
Keep Off
When power returns after an AC power failure, the
systems power is off. You must press the Power button
to power-on the system.
Turn On
When power returns after an AC power failure, the
system will automatically power-on.
Last State
When power returns after an AC power failure, the
system will return to the state where you left off before
power failure occurs. If the systems power is off when
AC power failure occurs, it will remain off when power
returns. If the systems power is on when AC power
failure occurs, the system will power-on when power
returns.
