41
Video Off Method
This determines the manner in which the monitor is blanked.
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video
buffer.
This option only writes blanks to the video buffer.
Initializes display power management signaling.
V/H
SYNC +
Blank
Blank
Screen
DPMS
MODEM Use IRQ
This category is used to set an IRQ channel (IRQ 3, 4, 5, 7, 9, 10 or
11) for the modem installed in your system.
Doze Mode, Standby Mode, Suspend Mode and HDD Power Down
These Green PC power saving categories are user configurable only
when the Power Management category is set to User Defined.
Doze
Mode
Standby
Mode
Suspend
Mode
HDD
Power
Down
When enabled and after the set time of system inactivity, the
CPU clock will run at a slower speed while all other devices
still operate at full speed.
When enabled and after the set time of system inactivity, the
fixed disk drive and the video will be shut off while all other
devices still operate at full speed.
When enabled and after the set time of system inactivity, all
devices except the CPU will be shut off.
This is used to define the continuous HDD idle time that
elapses before the HDD enters the power saving mode (motor
off). When enabled and after the set time of system inactivity,
the hard disk drive will be powered down while all other de-
vices remain active.
