11
2. Remove the system unit cover. Refer to the manufacturer’s instruc-
tions if necessary.
3. Detach all connectors from the old system board and remove ex-
pansion cards seated in any expansion slots.
4. Loosen the screws holding the original system board and remove
the board from the system. Save the screws.
5. Remove the C586VX from its original packing box. Be careful to
avoid touching all connectors and pins on the board. Please refer to
the handling instructions on pages 9-10 for proper handling tech-
niques.
6. Insert the memory modules into the memory banks on the C586VX.
The quantity and location of the memory modules depends on the
memory configuration and type of modules you intend to use.
7. Insert the cache module, if any, into the cache module slot on the
C586VX. Refer to the Cache Memory section for upgrading your
cache memory.
8. Install the CPU. Be sure pin 1 of the CPU is aligned with pin 1 of
the socket.
9. Set the corresponding jumpers.
10. Install the prepared C586VX system board into the case and re-
place the screws.
11.
Reinstall all cards and connectors and replace the system unit
cover. Reconnect all power cords and cables.
