29
2
Hardware Installation
X
JP5
PCI Express Card Setting
2-3 On:
To detect PCIE
card on PCIE1 slot
1-2 On:
Default
1
3
2
1
3
2
3
1
2
3
1
2
2-3 On:
To detect PCIE
card on PCIE2 slot
1-2 On:
Default
X
JP2
The system can detect most PCI Express cards. However if you are
using cards such as Gigabyte GC-LC05 (BroadCom BCM5721) or
other cards not detected by the system, set JP2 and/or JP5 to 2-3
On. Configuring the jumper to 2-3 On will allow the system to
detect the PCI Express card.
JP2 is used to configure the PCI Express card installed in the PCIE2
slot.
JP5 is used to configure the PCI Express card installed in the PCIE1
slot.
