www.dfi.com
Chapter 3 BIOS Setup
Chapter 3
29
Security
This section configures the trusted platform module (TPM) function.
TPM Availability
Show or hide the TPM availability and its configurations.
TPM Operation
Enable or disable the TPM function. It displays the following options:
•
No Operation: No changes to current state.
•
Disable: Disable and deactivate TPM.
•
Enable: Enable and activate TPM.
Clear TPM
Remove all TPM ownership contents.
Set Supervisor Password
Set the administrative password. The length of the password must be greater than
one character.
Install or Change the pass
-
word and the length of
password must be greater
that one character.
Current TPM Device
TPM State
TPM Availability
TPM Operation
Clear TPM
Supervisor Password
Set Supervisor Password
Main
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH20 Setup Utility
Security
Boot
Exit
Rev. 5.0
<TPM 2.0 (FTPM) >
Enabled, UnOwned
<Available>
<No Operation>
[]
Not installed
Boot
This section configures boot options.
OS Selection
Select the system’s operating system from Windows, Linux or DOS
.
Numlock
Select the power-on state for numlock
.
Boot Type
Select the boot type. The options are Dual Boot Type, Legacy Boot Type or UEFI Boot
Type.
PXE Boot Capability
Disable or enable PXE boot to LAN.
USB Boot
Enable or disable the booting to USB boot devices.
Selects Power-on state for
Numlock
OS Selection
Numlock
Boot Type
PXE Boot to LAN
USB Boot
Main
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH20 Setup Utility
Security
Exit
Rev. 5.0
<Windows>
<On>
<Legacy Boot Type>
<Disabled>
<Enabled>
Boot
