www.dfi.com
11
Chapter 2 Hardware Installation
Chapter 2
Rear Panel I/O Ports
The rear panel I/O consists of the following ports:
• 1 12V DC-in jack
• 1 VGA/HDMI port
• 1 GbE (RJ-45)
• 2 USB 3.0 port
12V DC-in
DC-in
This 2-pin terminal block provides a maximum of 100W/120W power and is considered a low
power solution. Connect a DC power cord to this terminal block. Using a voltage more than
the recommended range may fail to boot the system or cause damage to the system board.
DC-in
LAN 1
USB 3.0
VGA
VGA
-
+
