10
Rear Panel I/O Ports
The rear panel I/O consists of the following ports:
• 1 LAN/PoE PD
• 2 USB 3.1 Gen1 ports
• 1 Mini DP++ port
USB 3.1 Gen1
LAN/PoE PD
Mini DP++
LAN/PoE PD (48V DC, 802.3af)
Features
• 1 Intel
®
I211AT PCI Express Gigabit Ethernet controller or 1 optional Intel
®
I210IT PCI Ex-
press Gigabit Ethernet controller
AL05P is powered by power over ethernet (PoE) for industrial and signage use under PoE envi-
ronment. The LAN port enables the system board to connect to a local area network and 48V
DC power by means of a network hub. Using a voltage more than the recommended range
may fail to boot the system or cause damage to the system board.
BIOS Setting
Configure the onboard LAN in the “ACPI Configuration” submenu of the Advanced menu in the
BIOS. Refer to Chapter 3 for more information.
Driver Installation
Install the LAN drivers. Refer to Chapter 4 for more information.
LAN/PoE PD (48V DC)
Pin Assignment
Pin Assignment
1
White Green TX+
2
Green TX-
3
White Orange
RX+
4
Blue DC+ PoE
5
White Blue DC+
PoE
6
Orange RX-
7
White Brown
DC- PoE
8
Brown DC- PoE
1
8
