22
When Console Serial Redirect is set to enabled, the screen will appear like below:
Enable Console Redirec
-
tion Function
Console Serial Redirect
Terminal Type
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
COM1
Enable VT-100, 115200, N81
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH2O Setup Utility
Rev. 5.0
<Enabled>
<VT_100>
<115200>
<8 Bits>
<None>
<1 Bit>
<None>
Terminal Type
Select terminal type: VT_100, , VT_UTF8 or PC_ANSI.
Baud Rate
Select baud rate: 115200, 57600, 38400, 19200 or 9600.
Data Bits
Select data bits: 7 Bits or 8 Bits.
Parity
Select parity bits: None, Even or Odd.
Stop Bits
Select stop bits: 1 Bit or 2 Bits.
Flow Control
Select flow control type: None, RTS/CTS or XON/XOFF.
COM1
PortEnable
UseGlobalSetting
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH2O Setup Utility
Rev. 5.0
<Enabled>
<Enabled>
COM1
PortEnable
This field is used to enable or disable the COM port to redirect the console.
UseGlobalSetting
This field is to enable or disable to use global setting. When enabled the global set-
ting, setting of the COM port will be the same as those in Console Redirection section.
When disabled the global setting, setting of the COM port can be configured indepen-
dently in this section.
