DFI ak75-ec A+ Скачать руководство пользователя страница 82

Страница: 82 / 95

Supported Softwares

4.2 VIA Hardware Monitor

The system board comes with the VIA Hardware Monitor utility

contained in the provided CD. It is capable of monitoring the

systems hardware conditions such as the temperature of the CPU

and system, voltage, and speed of the CPU and chassis fans. It also

allows you to manually set a range to the items being monitored. If

the values are over or under the set range, a warning message will

pop-up. The utility can also be configured so that a beeping alarm

will sound whenever an error occurs. We recommend that you use

the Default Setting which is the ideal setting that would keep the

system in good working condition.

Note:

Use this utility only in Windows

95, Windows

98, Windows

98 SE, Windows

ME, Windows

2000 or Windows NT

4. 0

operating system.

To install the utility, insert the CD into a CD-ROM drive. The autorun

screen (Main Board Utility CD) will appear. Click the VIA Hardware

Monitor button to install the utility. Refer to its readme file for

instructions on using the utility.

4.3 VIA

Service Pack

The CD in the system board package also comes with the VIA

Service Pack. The service pack includes the following drivers.
Bus Master PCI IDE Driver

AGP VxD Driver

VIA Chipset Functions Registry

VIA PCI IRQ Miniport Driver
To install the drivers, insert the CD into a CD-ROM drive. The

autorun screen (Main Board Utility CD) will appear. Click the VIA

Service Pack button. For installation instructions or information, click

the Read Me button in the autorun screen.

VIA

Service Pack Installation Notes

The AGP VxD Driver and VIA Chipset Functions Registry drivers

in the VIA Service Pack are suppor ted in Windows

95,

Windows

98, Windows

98 SE, Windows

ME and Windows

2000.

Содержание ak75-ec A+
































































































Результаты поиска

Содержание ak75-ec A+

Отзывы:

Похожие инструкции для ak75-ec A+

Бренды по названию

Популярные бренды

DFI ak75-ec A+, Руководство пользователя

Результаты поиска

Содержание ak75-ec A+

Отзывы:

Похожие инструкции для ak75-ec A+

Бренды по названию

Популярные бренды