67
!
Award BIOS Setup Utility
PWR Lost Resume State
Keep Off
When power returns after an AC power failure, the
systems power is off. You must press the Power
button to power-on the system.
Turn On
When power returns after an AC power failure, the
system will automatically power-on.
Last State
When power returns after an AC power failure, the
system will return to the state where you left off
before power failure occurs. If the systems power is
off when AC power failure occurs, it will remain off
when power returns. If the systems power is on
when AC power failure occurs, the system will power-
on when power returns.
Wake Up Events
Move the cursor to this field and press <Enter>. The following fields
will appear.
USB Resume from S3
This field, when enabled, allows you to use a USB device to
wake up a system that is in the S3 (STR - Suspend To RAM)
state.
VGA
When set to On, the system will respond and wake up to any
VGA activity.
LPT & COM
Select the port you would like the system to respond and wake
up when an event occurs on that port.
HDD & FDD
When set to On, the system will respond and wake up to any
hard drive or floppy drive activity.
PCI Master
When set to On, the system will respond and wake up to any
PCI or bus master activity.
